Table of Contents
Advertisement
HS-550 Channel 4 configuration buttons
Computer Display Set Up
For best results preparation is the key, so ensure the following steps are completed BEFORE your event or
recording starts.
In order for the HS-550 to see the computer output you may need to extend the computer or laptop desktop to a
second monitor using Control Panel as below. When using a laptop you may need to use a function key
combination to allow use of the VGA port, much in the same way as using a laptop with a projector.
The PC graphics card will need 2 connections 1 for the PC monitor and a spare DVI-D connection to go to input 4
on the HS-550. The PC will need to have Microsoft Office installed in order for PowerPoint to be used. If all the
settings are correct on the mixer and the PC then we can attempt to use this DVI-D PC display output as part of
our HS-550 mix.
1. Connect a DVI-D cable between the HS-550 and the spare DVI-D port on the PC's graphics card.
2. Turn on the HS-550 and then the PC.
3. Create a PowerPoint presentation with Black text on a white background. You may want to create your
own Slide Master within PowerPoint. Use the PowerPoint Help function for advice on how to do this.
4. Select channel 4 on the Main source rail of the HS-550 so it is shown in the PROGRAM window. If you
cannot see the computer output extend the PC's desktop within Windows to monitor 2 as below.
5. PC screen size for monitor 2 should match the 1024x768 resolution.
6. If the DVI input or program monitor is just a blue screen (blue desktop background only), then try using
the PC mouse pointer to drag a window or a desktop icon across and onto the HS-550 DVI PROGRAM
window.
7. OK, so you should now have the Monitor 2 PC display running into input 4 on the HS-550.
A. Toggle between
B. Toggle between
C. Toggle Image
(OFF) Composite
(OFF) VGA
(OFF) 90% size
17
(ON) VGA / DVI input
(ON) DVI input
(ON) 95% size
A
B
C
Advertisement
Table of Contents
