Table of Contents
Advertisement
Appendix C
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Show Platform Commands
show platform backup interface
Use the show platform backup interface privileged EXEC command to display platform-dependent
backup information used in a Flex Links configuration.
Syntax Description
interface-id
dummyQ
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History
Release
12.2(40)EX1
Usage Guidelines
You should use this command only when you are working directly with a technical support
representative while troubleshooting a problem. Do not use this command unless a technical support
representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
OL-13271-03
show platform backup interface [interface-id | dummyQ] [ | {begin | exclude | include}
expression]
(Optional) Display backup information for all interfaces or the specified
interface. The interface can be a physical interface or a port channel.
(Optional) Display dummy queue information.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
show platform backup interface
C-3
Advertisement
Table of Contents
