Table of Contents
Advertisement
Appendix C
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Show Platform Commands
show platform tb
Use the show platform tb privileged EXEC command to display platform-dependent trusted-boundary
information during a stack master change to a new stack master.
Note
This command is supported only on stacking-capable switches.
Syntax Description
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History
Release
12.2(40)EX1
Usage Guidelines
You should use this command only when you are working directly with your technical support
representative while troubleshooting a problem. Do not use this command unless your technical support
representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show platform tb command:
Switch# show platform tb
Print TB sub-block information
(Fa1/0/2) device:(Cisco phone)
/* current interfaces with TB enabled, and the trust device type */
Current master switch:(Yes)
/* Is this switch the current master switch? */
New elected master
/* Is the master switch-over occurred and this is the new master switch? */
Master ready
/* Is the Master switch in ready state? */
HULC TB process on
/* Is the TB platform process currently running? */
CDP stable timer ON
OL-13271-03
show platform tb [ | {begin | exclude | include} expression]
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
:(No)
:(No)
:(No)
:(No)(360 secs)
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
show platform tb
C-43
Advertisement
Table of Contents
