Placing The Document On The Original Glass - Oce cm4521 User Manual

Before use

Placing the document on the original glass

1
Lift open the ADF.
– When placing the document on the original glass,
be sure to lift open the ADF at least 20°. If the
document is placed on the original glass without
the ADF being lifted at least 20°, the correct
document size will not be detected.
2
Place the document so that the side to be
scanned faces down, and then place the page
on the original glass.
– Load the document pages so that the top of the
document is toward the back or the right side of
the machine.
When loaded in the v orientation: When loaded in the w orientation:
cm4521
20° 20°
1
1-19