Dect - Draytek Vigor2710 Series User Manual

3 . 5 . 4 D E C T
3 . 5 . 4 D E C T
From this page, you can enable register or deregister handsets for using DECT function.
Refresh Seconds
Handset
Status
PCM Channel
Deregister Handset
Wideband Voice
Ring Handset
DECT phone access
mode
Enable Registration
Mode
Specify the interval of refresh time to obtain the latest VoIP
calling information. The information will update immediately
when the Refresh button is clicked.
After DECT phone registered with router, it would be assigned
one unique handset ID.
It is used to indicate the DECT handset status. For example, if
you have registered with router DECT module, you would get –
F00_REGISTERED_IDLE. If you get one incoming call for
this DECT handset, you would see - F07_CALL_RECEIVED.
This field can distinguish which PCM channel is used by
the handset. 255 (default setting) means it is idle and voice data
is not transferred through any PCM channel.
If your handset has registered to the router, you could use this
button to deregister it from router.
Check this box to enable the function to avoid hearing noisy
voice.
Check this box to enable the function.
When registering with DECT phone, you will be asked to type
access code. The default setting in Vigor2710VDn is 1234.
If you want to use handset to register with the router, you need
to enable DECT module registration mode via this button.
Otherwise, you can't search our DECT base station from the air.
77
Vigor2710 Series User's Guide