Dect - Draytek Vigor2710 Series User Manual

4 . 1 1 . 4 D E C T
4 . 1 1 . 4 D E C T
From this page, you can enable register or deregister handsets for using DECT function.
Available settings are explained as follows:
Item
Refresh Seconds
Handset
Status
PCM Channel
Deregister Handset
Wideband Voice
Ring Handset
Vigor2710 Series User's Guide
Description
Specify the interval of refresh time to obtain the latest VoIP
calling information. The information will update immediately
when the Refresh button is clicked.
After DECT phone registered with router, it would be assigned
one unique handset ID.
It is used to indicate the DECT handset status. For example, if
you have registered with router DECT module, you would
get – F00_REGISTERED_IDLE. If you get one incoming
call for this DECT handset, you would see -
F07_CALL_RECEIVED.
This field can distinguish which PCM channel is used by
the handset. 255 (default setting) means it is idle and voice
data is not transferred through any PCM channel.
If your handset has registered to the router, you could use this
button to deregister it from router.
Check this box to enable the function to avoid hearing noisy
voice.
Check this box to enable the function.
248