Draytek Vigor2710 Series User Manual page 261

vigor router.
For WPS is supported in WPA-PSK or WPA2-PSK mode, if you do not choose such mode
in Wireless LAN>>Security, you will see the following message box.
Please click OK and go back Wireless LAN>>Security to choose WPA-PSK or
WPA2-PSK mode and access WPS again.
Below shows Wireless LAN>>WPS web page.
Enable WPS
WPS Status
SSID
Check this box to enable WPS setting.
Display related system information for WPS. If the wireless
security (encryption) function of the router is properly
configured, you can see 'Configured' message here.
Display the SSID1 of the router. WPS is supported by SSID1
only.
249
Vigor2710 Series User's Guide