Draytek Vigor2710 Series User Manual page 77

Hide caller ID [Deact]
Call Waiting [Act]
Call Waiting [Deact]
Block Anonymous[Act]
Block Anonymous[Deact] Dial the number typed in this field to release this function.
Block Unknown Domain
[Act]
Block Unknown Domain
[Deact]
Block IP Calls [Act]
Block IP Calls [Deact]
Block Last Calls [Act]
P S T N S e t u p
P S T N S e t u p
Some emergency phone (e.g., 911) or special phone cannot be dialed out by using VoIP and
can be called out through PSTN line only. To solve this problem, this page allows you to set
five sets of PSTN number for dialing without passing through Internet. Please type the
number in the field of phone number for PSTN relay.
Then, check the Enable box to make the PSTN number available for dial whenever you
need.
Note: A Line port on the router allows connection to a PSTN line so the user can select
either the PSTN or VoIP for the calls, and can access the PSTN line during power
black-outs when VoIP is cut off (only available on port 2).
(ID) not displayed on the display panel of remote end.
Dial the number typed in this field to release this function.
Dial the number typed in this field to make all the incoming
calls waiting for your answer.
Dial the number typed in this field to release this function.
Dial the number typed in this field to block all the incoming
calls with unknown ID.
Dial the number typed in this field to block all the incoming
calls from unknown domain.
Dial the number typed in this field to release this function.
Dial the number typed in this field to block all the incoming
calls from IP address.
Dial the number typed in this field to release this function.
Dial the number typed in this field to block the last incoming
phone call.
65
Vigor2710 Series User's Guide