Disabling Security - Zoom Cable Modem/Router User Manual

Otherwise, type something into the text box and click on Generate WEP Keys and
WEP Keys will automatically be generated for you.
Caution! Do not click Apply until you have entered WEP Keys.
8 Click Apply.
9 Now you need to set up each of your wireless devices with the SSID and
passphrase. See Chapter 3, Connecting other Devices to the Cable Modem/Router
for help on connecting your wireless computers and devices.
Your security setup configuration is now complete!

Disabling Security

If for some reason you need to set up an unsecured network, you will need to disable the
default security that is currently set up for your Cable Modem/Router. Follow the
instructions below.
1 Open the Zoom Configuration Manager by typing the following in your Web browser's
address bar: http://192.168.0.1
2 In the Login dialog box, type the following User Name and Password in lower case,
then click Login.
User Name: admin
Password: admin
3 Click Wireless on the top menu.
4 Then click Primary Network on the left-side menu and in the text box labeled
Network Name (SSID), type an SSID of your choice. The SSID needs to be at least
one character long, and it's probably best to pick a name that you'll recognize as
yours.
5 Set all the following drop-down menus to Disable: WPA, WPA-PSK, WPA2, and
WPA2-PSK.
6 Click Apply.
7 Now you need to set up each of your wireless devices with the correct SSID. See
Chapter 3, Connecting other Devices to the Cable Modem/Router
connecting your wireless computers and devices. Since Security is disabled you do
not need to configure security as described in Chapter 3.
That's it! You have now disabled security.
28
for help on