Enabling Or Disabling Upnp - Zoom X7N User Manual

Click DSL under Advanced Setup from the left-side menu of the
Zoom Configuration Manager.
Setting Description
BitSwap Enables or disables bit swapping in both
upstream and downstream directions. If you
experience frequent connection drops, it may
help to change the bit swap settings.
After you enter the values, click Save/Apply.
Click on Advanced Settings only if you want to configure DSL
Advanced Settings. Most users will not need to do this.

Enabling or Disabling UPnP

Universal Plug and Play (UPnP) with Internet Gateway Device
(IGD) protocol is installed in X7N units when they are shipped by
Zoom. This means that other devices plugged into your computer
or network (for example, a gaming application, router, or
stand-alone firewall) that use UPnP should automatically detect the
and make the needed configurations for them to work
X7N
together. There is no setup for you to do. Change this setting only
if you have a good reason to do so.
To change the status of Universal Plug and Play, go to the LAN
page under the Advanced Setup link.
Setting
Enable UPnP
Click Save/Apply.
Chapter 8: Advanced X7N Setup Options
Description
Select this check box to enable or
disable Universal Plug and Play. By
default UPnP is enabled.
X7N User Manual