Zoom Cable Modem/Router User Manual page 42

Figure 6. Example of Security Page
To restore the Cable Modem/Router to factory defaults:
1
In the Security submenu, select the Yes button next to Restore Factory Defaults.
2
Click Apply.
3
Click OK to reboot the Cable Modem/Router. The reboot is complete when the
POWER LED stops blinking.
4
If the Login screen doesn't reappear, click the Refresh link to log back in to the
Configuration Manager.
Table 3. Security Menu Option
Option
User Name
Current Password
New Password
Re-Enter New
password
Reboot
Mode
Note: DO NOT restore factory defaults to any changes on this page.
Description
Enter the new User Name for the administrator.
Enter the existing security password. The password can be
found on the bottom label of the unit
Enter the new security password.
Re-enter (confirm) the new security password.
Click the Yes button next to reboot, then click Apply to reboot
the router.
Click the Bridge button if you do not wish to use the 5352 as a
router. Most users should not change this setting.
42