Advertisement
Available languages
Available languages
Quick Links
ATA Quick Start
ATA Quick Start
ATA Quick Start
ATA Quick Start
Your ATA comes with a power cube and Ethernet cable. Some
models also include other items, such as a phone cord, phone-jack
adapter, phone filter, or service provider flyer.
To complete the installation, you need the following:
-
A broadband Internet connection using a cable modem,
ADSL, T1, E1, SDSL, or any other high-speed "always on"
Internet connection.
-
An account set up with a VoIP service provider. If you
do not have an account set up, please look for a Read Me
First! flyer in the box for your VoIP ATA and follow its
instructions. If there is no flyer, go to your service provider's
Web site and sign up for service.
-
A router that uses your broadband Internet connection. This
can be an ADSL modem with a built-in router, a cable
modem with a built-in router, or some other router
connected to a broadband Internet connection. The router
needs at least one available LAN port, and the router needs
to be set up for 10/100 or 10/100/1000 or 10 Mbps. (Most
routers use 10/100 unless you change them.)
-
A telephone so you can place and receive phone calls.
Now you're ready to connect the ATA to a telephone, a router,
and a "live" power outlet. You will make your connections to the
back of the ATA.
1 1 1 1
Plug your telephone or cordless phone base station into the
ATA's PHONE jack, which is on the far left of the ATA's
back panel.
Note: In some countries outside the USA, you may need to use a phone-jack adapter.
Plug the adapter into the ATA's PHONE jack and then plug in your phone
2 2 2 2
Plug one end of the Ethernet cable into the ATA's Ethernet
port and the other end into a LAN port of your router.
3 3 3 3
If your unit has the word TELCO on the front panel of the
unit, continue with step 4.
If your unit does not have the word TELCO on the front
panel, continue with step 5.
4 4 4 4
For ATA units with a TELCO jack: Plug one end of the
supplied telephone cord into the ATA's TELCO jack and
the other end into your home or office's telephone jack, one
.
Advertisement
Related Manuals for Zoom 5803
Summary of Contents for Zoom 5803
- Page 1 Your ATA comes with a power cube and Ethernet cable. Some models also include other items, such as a phone cord, phone-jack adapter, phone filter, or service provider flyer. To complete the installation, you need the following: A broadband Internet connection using a cable modem, ADSL, T1, E1, SDSL, or any other high-speed “always on”...
- Page 2 may need to use a phone-jack adapter so the phone cord can fit into your wall jack. If you have ADSL service at that wall jack, you need to put an ADSL filter between that wall jack and the ATA’s TELCO jack. Now continue with step 5. 5 5 5 5 Plug the ATA’s power cube into the ATA’s PWR jack and the other end into a “live”...
- Page 3 cannot place calls through the Internet. Advanced Features - Controlling the ATA from Your Phone Your ATA has a number of features that relate to calls traveling through the Internet. These features can be controlled from the phone plugged into your ATA as described below. For all these commands you first take the phone off-hook and then enter the command.
- Page 4 The service provider can also choose how to handle updates, and whether updates should be automatic. If you are a VoIP service provider, please contact Zoom in Boston, MA, USA at (617) 535-9383 or in the UK at +44 (0) 1252 582016 to find out...
- Page 5 Su ATA viene con un cargador (power cube) y un cable Ethernet. Algunos modelos también incluyen otros elementos, tales como un cordón telefónico, un adaptador para el enchufe telefónico (phone-jack adapter), un filtro telefónico, o un folleto del proveedor del servicio. Para completar la instalación se necesita lo siguiente: Una conexión de Internet de banda ancha usando un cable modem, ADSL, T1, E1, SDSL, o cualquier otra...
- Page 6 Si su unidad tiene la palabra TELCO en el panel frontal de la unidad, continuar con el paso 4. Si su unidad no tiene la palabra TELCO en el panel frontal continuar con el paso 5. 4 4 4 4 Para las unidades ATA con un enchufe TELCO: Conectar un extremo del cordón telefónico recibido en el enchufe TELCO del ATA y el otro extremo en el enchufe...
- Page 7 través de Internet, o puede hacer llamadas que viajan primero a través de su servicio normal de teléfono mediante su enchufe TELCO. Su ATA puede ser determinado por su proveedor de servicio, por ejemplo, para que enrute todas las llamadas a través de Internet a menos que esas llamadas sean locales o llamadas de emergencia.
- Page 8 Habilitar el identificador de llamadas para todas las llamadas que salgan. Bloquear el identificador de llamadas para todas las llamadas que salgan. Habilitar el identificador de llamadas para todas las llamadas que entran. Deshabilitar el identificador de llamadas para todas las llamadas que entran.
-
Page 9: Regulatory Information
Si usted es un proveedor de servicio VoIP, por favor ponerse en contacto con Zoom en Boston, MA, EUA en el (617) 535-9383 o en el Reino Unido en el +44 (0) 1252 582016 para conocer las diversas maneras en que hemos personalizado este producto para satisfacer sus necesidades. - Page 10 There are no user serviceable components within this equipment. For repair and/or warranty information, visit http://www.zoom.com. It shall be unlawful for any person within the United States to use a computer or other...
-
Page 11: Safety Notices
Boston, MA 02111 USA / 617-423-1072 www.zoom.com Brand/ Marca Zoom VoIP ATA Series 0229, Models 5800, 5801, 5802, 5803, Type/Tipo 5804, 5805, 5806, 5807, 5808, 5809 The manufacturer declares under sole responsibility that this equipment is compliant to Directive 1999/5/EC via the following. This product is CE marked. - Page 12 NOTICE This document contains proprietary information protected by copyright, and this Quick Start and any accompanying hardware, software, firmware, and documentation are copyrighted. No part of this document may be photocopied or reproduced by mechanical, electronic, or other means in any form. The manufacturer does not warrant that the hardware will work properly in all environments and applications, and makes no warranty or representation, either expressed or implied, with respect to the quality, performance, merchantability,...