Connecting Additional Computers And/Or Other Devices To The Cable Modem/Router's Ethernet/Lan Ports - Zoom Cable Modem/Router User Manual

Repeat steps 1-5 above for each Windows computer you want to connect to the Cable
Modem/Router. If you want to connect a non Windows computer or another device
such as a tablet, follow the instructions below.
If you are using a non Windows computer or other device that supports WPS
Please refer to the instructions for your device for more information on using WPS. The
directions below should work for most users.
1 Press the WPS LED pushbutton on the front panel of the router for at least 7
seconds. The WPS LED should blink green.
2 Within 2 minutes (before the WPS LED light turns off), press the WPS button on the
device that you're linking wirelessly to the modem/router. The button may be a
physical pushbutton on the device or a button on a page of the device's wireless
network configuration menus.
3 Congratulations! You should now have a secure connection between your Cable
Modem/Router and a device. Now is a good time to check that your device's Internet
connection is working. Open your browser and go to a familiar Web site. If you are
able to connect, continue with the next step below.
If you are not able to connect to the Internet, please see
Troubleshooting Tips.
4 If you have other devices whose WPS security you need to set, repeat steps 1
through 3 for each device. When they are finished, the basic setup for these local
wireless devices should be complete
Connecting Additional Computers and/or Other Devices to the
Cable Modem/Router's Ethernet/LAN ports
You can plug up to four computers, game consoles, or other Ethernet-capable devices into the
Cable Modem/Router's LAN ports. For information about your specific device, please refer
to the documentation that came with that device. Follow the instructions below for each
computer or other device.
1 If you connected the Cable Modem/Router to a computer using a wired connection
when setting up the Cable Modem/Router, unplug the computer now if you don't
want that computer to stay connected to the Cable Modem/Router.
2 To connect a computer or other Ethernet-capable device, plug one end of an
Ethernet cable into an available Ethernet (LAN 1, 2, 3, or 4) port on the Cable
Modem/Router and plug the other end of the Ethernet cable into the Ethernet port of
the additional device you want to connect to the Cable Modem/Router. (If you are
Appendix A:
.
23