Event Log - Zoom Cable Modem/Router User Manual

Table 32. L2TP/PPTP Menu Option
Option
PPP Address Range
(Start/End)
PPP Security (MPPE
Encryption)
Username
Password
Confirm Password
User List
L2TP Server
(Preshared Phrase)

Event Log

The Event Log page shows the VPN event log.
To access the Event Log page:
1
Click VPN in the menu bar.
2
Then click the Event Log submenu.
Figure 37 shows an example of the menu and Table 33 describes the items you can
select.
Description
Configure the dedicated IP address pool for L2TP/PPTP. The
LAN IP subnet at one end of the VPN tunnel must be different
from the LAN
IP subnet at the other end of the VPN tunnel. For example, if
one side's LAN subnet is 192.168.0.x, then the other side
should be 192.168.1.x (where the subnet mask in this
example is 255.255.255.0).
Select Enable to enable MPPE (Microsoft Point-to-Point
Encryption). MPPE is used to enhance the confidentiality of
PPP-encapsulated packets. It uses the RSA RC4 encryption
algorithm.
Enter the user name for the L2TP or PPTP tunneling.
Enter the password for the L2TP or PPTP tunneling.
Re-enter to confirm the password.
Show the existing user list.
Enter a key (Pre-Shared key) for authentication. This key is
used by IPSec to validate the computer as a trusted machine.
108