Wmm (Wi-Fi Multimedia) - Zoom Cable Modem/Router User Manual

Table 27. Access Control Menu Option
Option
Wireless
Select the wireless interface to configure the access control list.
Interface
Select whether wireless clients with the specified MAC address are
MAC Restrict
allowed or denied wireless access. To allow all clients, select
Mode
Disabled.
Shows the list of wireless client MAC addresses to allow or deny
MAC
based on the Restrict Mode setting. Valid MAC address formats are
Addresses
XX:XX:XX:XX:XX:XX and XX-XX-XX-XX-XX-XX.
Shows the list of connected wireless clients. When a client connects
(associates) to the network, it is added to the list; when a client
leaves (disassociates) from the network, it is removed from the list.
Connected
For each client, the age (in seconds), estimated average receive
Clients
signal strength (in dBm), IP address, and host name are presented.
The age is the amount of time elapsed since data was transmitted
to or received from the client.

WMM (Wi-Fi Multimedia)

The WMM page allows you to configure WMM (Wi-Fi Multimedia) feature. WMM is a
subset of the 802.11e wireless LAN (WLAN) specification that enhances quality of
service (QoS) on a network by prioritizing data packets according to their categories.
WMM enhances QoS at the wireless driver level. It provides a mechanism to prioritize
wireless data traffic to and from the associated (WMM capable) stations.
If you enable the WMM feature, you may need to decide whether or not to broadcast
Cable Modem/Router's network name. Broadcasting allows you to easily recognize
your wireless network in the list of available networks. Once you have configured your
wireless clients, it is recommended that you disable the broadcasting feature.
To access the WMM page:
1
Click Wireless in the menu bar.
2
Then click the WMM submenu.
Figure 32 shows an example of the menu and Table 28 describes the items you can
select.
Description
95