Zoom Cable Modem/Router User Manual page 32

In this case the same ports are used for both incoming and outgoing traffic, so we would
use the same ports as both the triggering port and the target port as shown below.
To setup port triggering for World of Warcraft:
1
Launch a Web browser.
2
In the browser address bar, type http://192.168.0.1 and press the Enter key.
3
In the Login screen, enter:
default username: admin
default password: admin
Both the username and password are case sensitive. The default username and
password are printed on the bottom label of your unit.
4
Click the Login button to access the Cable Modem/Router. The Status page
appears.
5
Click Advanced in the menu bar.
6
Then click the Port Triggers submenu. The Port Triggers page appears.
7
We will need to setup 5 triggers for World of Warcraft. The first rule would cover
ports 1119-1120. Enter 1119 in the Trigger Start Port field and 1120 in the Trigger
End Port field. Since these ports are used to send data both directions enter 1119 in
the Target Start Port and 1120 in the Target End Port.
32