Multiplot Signal Display Legend - REXROTH VT-VRPD-2 Start-Up And Operation

RE 30126-01-B/08.07 | Manual

Multiplot signal display legend

Parameters
The signal display legend shows the relevant information for the represented signals
in tabular form.
Fig. 49 Real-time oscilloscope – Signal display – Legend
In the Parameters column the signals are shown with their names. Clicking on a signal
name changes the background to white. This means the signal is selected.
Double-clicking on a signal name opens the "Adjust " window.
Fig. 50 "Adjust graphs" window
In the "Adjust graphs" window you change the graphical display of the selected signal.
Clicking on the "Color" field opens a color table from which you can select a new
display color.
The "Thickness" field contains a selection menu for changing the line thickness of the
signal.
In the "Min" and "Max" fields you enter the scaling in the Y-direction of the signal
display for the selected signal.
The current parameter value is displayed in the signal display legend following the
signal name.
The Color column is used for selecting the display color in order to ensure proper
Color
association and recognizability in the signal display.
The "X1" and "Y1" columns are directly related to the "Show cursor" button. If you
X1/Y1
move Cursor 1 to a certain place in the signal plot, you can read off the X/Y
coordinates of the displayed signal in the X1/Y1 column.
In the "X2"/"Y2" column you read off the coordinates of Cursor 2.
X2/Y2
The "dX" (delta X) and "dY" (delta Y) columns show the difference between the X and
dX/dY
the Y values.
Hydraulics | Bosch Rexroth AG
BODAC – Menu Description 5
71/76