Commands - REXROTH VT-VRPD-2 Start-Up And Operation

RE 30126-01-B/08.07 | Manual

Commands

Commands
Apart from the pull down menu's in the „Structure" window there are also several
buttons that will lead to seperate windows when selected clicking on it:
In order to have a smooth control Step changes of the command should be avoided.
For this purpose there are parameters available to shape the command signal before
it enters the control portion of the controller.
To create a command the user has the ramp parameters to manipulate this command.
Ramp
The configured ramp time always reflects the time it takes to reach the Command of a
100%. E.g. if the Command changes from 0% to 50 % it will take half the time
configured in the Ramp time.
In this window you set the digital selected commands as well as the Ramps and S-
Ramps .
Clicking on the preceding icon, which is a component of the toolbar,
also opens the „Commands" window. A listing of existing shortcuts for
the toolbar can be found in Section 4.2 „BODAC Toolbar".
Hydraulics | Bosch Rexroth AG
Application: Valve control for the 4WRE6 / 4WRE10 3
Clicking on this button opens the window „Commands". See also
"Commands "
Clicking on this button opens the window „Commands". See also
"Commands "
Clicking on this button opens the window „Analog I/O". See also
„Configure Analog I/O - Inputs".
Clicking on this button opens the window „Command Adjustment".
See also „Valve Configuration"
22/76