Controller Faceplate Elements - REXROTH VT-VRPD-2 Start-Up And Operation

RE 30126-01-B/08.07 | Manual
2.3

Controller faceplate elements

Status-LED
Serial port
Fig. 4 Faceplate elements
The LED indicates the status of the controller card.
OK "Ready"
"Enable" (d18) active
The controller cards software is configured using the serial port. The following graphic
shows the pin configuration for the D-SUB female on the front panel.
Hydraulics | Bosch Rexroth AG
Overview of the 4WRE 6 and 4WRE 10 – Valve control 2
14/76