View Menu - REXROTH VT-VRPD-2 Start-Up And Operation

RE 30126-01-B/08.07 | Manual
Card information –
Help menu
Versions
Serial number
Comments
Display Text
5.3

View menu

Takes you directly to the help for the current topic, or to the contents page of the
BODAC windows help.
In the upper section of the "Card information" window you will find the manufacturer
data which provides exact specifications for your controller card.
Keep the following information handy for when you need to contact product support:
n
Product (contains the unique product number of your card).
n
Mat.-Nr. (contains the material number of your card.)
Here the hard- and software used is listed in detail.
In these areas you will find information which exactly specifies your controller card
hardware. Keep this information handy for when you need to contact product support.
You can enter relevant comments in the entry field, including information pertaining to
your application or settings.
This field contains a standard text filled in by Bosch Rexroth. The text entered here is
shown in run mode as a scrolling text on the card display. You can choose to display
this text, use a text you have entered yourself, or use a signal of your choice.
Have the information in this window ready if you need to contact us.
The "View" menu contains the "Status" command you can use to open the "Status"
window.
Fig. 24 "View" menu
Hydraulics | Bosch Rexroth AG
BODAC – Menu Description 5
46/76