REXROTH VT-VRPD-2 Start-Up And Operation page 39

RE 30126-01-B/08.07 | Manual
Sends the settings and entries you made to the card and overwrites
F3
the previously saved data in volatile memory. (see also "Write
Param eters")
If you are in an entry field, you can press "F11" to increment the field
F11
contents. Simultaneously BODAC writes this parameter to the card.
If you are in an entry field, you can press "F12" to decrement the field
F12
contents. Simultaneously BODAC writes this parameter to the card.
If you are in the structure editor in the entry field block, you can use
Page-
"Page down" to increment the field contents. This then opens the next
down
higher block.
If you are in the structure editor in the entry field block, you can use
Page-
"Page up" to decrement the field contents. This then opens the next
up
lower block.
Hydraulics | Bosch Rexroth AG
User interface BODAC - General 4
39/76