Window Toolbar - REXROTH VT-VRPD-2 Start-Up And Operation

RE 30126-01-B/08.07 | Manual

Window toolbar

The "Read parameters" command reads the data (parameter set) stored in
the working memory of the VRPD and passes the set to the BODAC
program.
The "Write parameters" command sends the current data (parameter set)
from BODAC to the working memory of the VRPD.
The "Set parameters to memory" sends the VRPD parameter set from
working memory to permanent memory.
Opens the "Language" window.
Opens the "Print forms" window.
Opens the "Structure" window.
Opens the "Command Adjustment" window.
Opens the "Command values" window.
Opens the "Digital I/O" window.
Opens the " Motion Data" window.
Opens the "Test jacks" window.
The Window toolbar contains buttons with symbols (icons) execute the most
commonly used functions, invoke commands or open windows when clicked on with
the mouse.
Following is a list of the available functions:
see 4.2 "Read Parameters"
see 4.2 "Write Parameters"
Clicking on this symbol writes only the parameter value you have just
changed to the card.
The "Set parameters to memory" sends the current data from BODAC
to the memory chip of the controller card.
Hydraulics | Bosch Rexroth AG
User interface BODAC - General 4
37/76