RE 30126-01-B/08.07 | Manual
3
Application: Valve control for the 4WRE6 / 4WRE10
3.1
Structured list for proceeding with startup
Using software for startup
Configure inputs
Define structure
Store current status
Process settings
Starting the application
n
The BODAC Software
n
Data interchange between BODCA software and the controller card VT-VRPD
n
Opening or creating Parameters
n
Configure inputs
Setpoint using a voltage input
Setpoint using a current input
Ramp + (increasing)
Ramp - (decreasing)
Configure analog inputs
n
Configure Profile
Configure structure
Setpoint configuration
Faults
n
Store parameter values
n
Check Process settings
Motion Data
Status
Testjacks
n
Start the Application
Hydraulics | Bosch Rexroth AG
Application: Valve control for the 4WRE6 / 4WRE10 3
16/76