Overview; Inspection Of The Purchased Product; Inspecting The Product; Instruction Manual (This Manual) - Hitachi SJ700-2 Instruction Manual

1.1 Inspection of the Purchased Product

1.1.1 Inspecting the product

After unpacking, inspect the product as described below.
If you find the product to be abnormal or defective, contact your supplier or local Hitachi Distributor.
(1) Check the product for damage (including falling of parts and dents in the inverter body) caused during
transportation.
(2) Check that the product package contains an inverter set and this Instruction Manual.
(3) Check the specification label to confirm that the product is the one you ordered.
Maximum applicable motor capacity

1.1.2 Instruction manual (this manual)

This Instruction Manual describes how to operate the Hitachi SJ700-2 Series Inverter.
Read this Instruction Manual thoroughly before using the inverter, and then keep it handy for future
reference.
When using the inverter, together with optional products for the inverter, also refer to the manuals supplied
with the optional products.
Note that this Instruction Manual and the manual for each optional product to be used should be delivered
to the end user of the inverter.
Figure 1-1 Location of the specifications label
Inverter model
Model:
kW/(HP): 15/(20)
Input/Entree:
Input ratings
Output ratings
Output/Sortie: 0 -400Hz
Serial number
MFGNo.
Figure 1-2 Contents of the specifications label
SJ700-150HFF2
50Hz,60Hz
50Hz,60Hz 380-480V
380-480V
77AAT12345 A 001
Hitachi Industrial Equipment
MADE IN JAPAN
Systems Co.,Ltd.
1 - 1
Chapter 1 Overview
Specification
label
V 1 Ph A
3 Ph 35A
3 Ph 32A
Date: 0707
NE