Hitachi SJ700-2 Instruction Manual page 265

Code Function name
A081 AVR function select
A082 AVR voltage select
A085 Operation mode selection
A086 Energy saving mode tuning
A092 Acceleration (2) time setting
Acceleration (2) time setting,
A292
2nd motor
Acceleration (2) time setting,
A392
3rd motor
A093 Deceleration (2) time setting
Deceleration (2) time setting,
A293
2nd motor
Deceleration (2) time setting,
A393
3rd motor
Select method to switch to
A094
Acc2/Dec2 profile
Select method to switch to
A294
Acc2/Dec2, 2nd motor
Acc1 to Acc2 frequency
A095
transition point
Acc1 to Acc2 frequency
A295
transition point, 2nd motor
Dec1 to Dec2 frequency
A096
transition point
Dec1 to Dec2 frequency
A296
transition point, 2nd motor
A097 Acceleration curve selection
A098 Deceleration curve setting
[OI]-[L] input active range start
A101
frequency
[OI]-[L] input active range end
A102
frequency
[OI]-[L] input active range start
A103
current
[OI]-[L] input active range end
A104
current
[OI]-[L] input start frequency
A105
enable
[O2]-[L] input active range start
A111
frequency
[O2]-[L] input active range end
A112
frequency
[O2]-[L] input active range start
A113
voltage
[O2]-[L] input active range end
A114
voltage
Acceleration curve constants
A131
setting
Deceleration curve constants
A132
setting
Operation-target frequency
A141
selection 1
Operation-target frequency
A142
selection 2
A143 Operator selection
A145 Frequency to be added
Sign of the frequency to be
A146
added
EL-S-curve acceleration
A150
ratio 1
EL-S-curve acceleration
A151
ratio 2
EL-S-curve deceleration
A152
ratio 1
EL-S-curve deceleration
A153
ratio 2
*1 This setting is valid only when the OPE-SR is connected.
Monitored data or setting
00 (always on), 01 (always off), 02 (off during deceleration)
200 V class: 200, 215, 220, 230, 240 (V)
400 V class: 380, 400, 415, 440, 460, 480 (V)
00 (normal operation), 01 (energy-saving operation), 02 (fuzzy operation)
0.1 to 100.0
0.01 to 99.99, 100.0 to 999.9, 1000. to 3600. (s)
0.01 to 99.99, 100.0 to 999.9, 1000. to 3600. (s)
0.01 to 99.99, 100.0 to 999.9, 1000. to 3600. (s)
0.01 to 99.99, 100.0 to 999.9, 1000. to 3600. (s)
0.01 to 99.99, 100.0 to 999.9, 1000. to 3600. (s)
0.01 to 99.99, 100.0 to 999.9, 1000. to 3600. (s)
00 (switching by 2CH terminal), 01 (switching by setting), 02 (switching only
when rotation is reversed)
00 (switching by 2CH terminal), 01 (switching by setting), 02 (switching only
when rotation is reversed)
0.00 to 99.99, 100.0 to 400.0 (Hz)
0.00 to 99.99, 100.0 to 400.0 (Hz)
0.00 to 99.99, 100.0 to 400.0 (Hz)
0.00 to 99.99, 100.0 to 400.0 (Hz)
00 (linear), 01 (S curve), 02 (U curve), 03 (inverted-U curve), 04 (EL-S curve)
00 (linear), 01 (S curve), 02 (U curve), 03 (inverted-U curve), 04 (EL-S curve)
0.00 to 99.99, 100.0 to 400.0 (Hz)
0.00 to 99.99, 100.0 to 400.0 (Hz)
0. to "[OI]-[L] input active range end current" (%)
"[OI]-[L] input active range start current" to 100. (%)
00 (external start frequency), 01 (0 Hz)
-400. to -100., -99.9 to 0.00 to 99.99, 100.0 to 400.0 (Hz)
-400. to -100., -99.9 to 0.00 to 99.99, 100.0 to 400.0 (Hz)
-100. to 02 end-frequency rate (%)
"02 start-frequency rate" to 100. (%)
01 (smallest swelling) to 10 (largest swelling)
01 (smallest swelling) to 10 (largest swelling)
00 (digital operator), 01 (keypad potentiometer), 02 (input via O), 03 (input via
OI), 04 (external communication), 05 (option 1), 06 (option 2), 07 (pulse-string
frequency input)
00 (digital operator), 01 (keypad potentiometer), 02 (input via O), 03 (input via
OI), 04 (external communication), 05 (option 1), 06 (option 2), 07 (pulse-string
frequency input)
00 (addition: A141 + A142), 01 (subtraction: A141 - A142), 02 (multiplication:
A141 x A142)
0.00 to 99.99, 100.0 to 400.0 (Hz)
00 (frequency command + A145), 01 (frequency command - A145)
0. to 50. (%)
0. to 50. (%)
0. to 50. (%)
0. to 50. (%)
Chapter 8 List of Data Settings
8 - 5
Setting
Default
during
operation
(allowed or (allowed or
_FF _FEF _FUF
not)
02 00 00
200/400 230/400 230/460
00
50.0
15.00
15.00
15.00
15.00
15.00
15.00
00
00
0.00
0.00
0.00
0.00
00
00
0.00
0.00
20.
100.
00
0.00
0.00
-100.
100.
02
02
02
03
00
0.00
00
25.
25.
25.
25.
Change
during
operation Page
not)
4-11
4-32
4-30
4-31
4-14
4-31
4-13
4-14
4-31