Hitachi SJ700-2 Instruction Manual page 268

Chapter 8 List of Data Settings
Code Function name
Cumulative input power data
b078
clearance
Cumulative input power display
b079
gain setting
b082 Start frequency adjustment
b083 Carrier frequency setting
Initialization mode (parameters or
b084
trip history)
b085 Country code for initialization
Frequency scaling conversion
b086
factor
b087 STOP key enable
b088 Restart mode after FRS
Automatic carrier frequency
b089
reduction
b090 Dynamic braking usage ratio
b091 Stop mode selection
b092 Cooling fan control
b095 Dynamic braking control
b096 Dynamic braking activation level
Thermistor for thermal protection
b098
control
b099 Thermal protection level setting
b100 Free-setting V/f frequency (1)
b101 Free-setting V/f voltage (1)
b102 Free-setting V/f frequency (2)
b103 Free-setting V/f voltage (2)
b104 Free-setting V/f frequency (3)
b105 Free-setting V/f voltage (3)
b106 Free-setting V/f frequency (4)
b107 Free-setting V/f voltage (4)
b108 Free-setting V/f frequency (5)
b109 Free-setting V/f voltage (5)
b110 Free-setting V/f frequency (6)
b111 Free-setting V/f voltage (6)
b112 Free-setting V/f frequency (7)
b113 Free-setting V/f voltage (7)
b120 Brake Control Enable
b121 Brake Wait Time for Release
b122 Brake Wait Time for Acceleration
b123 Brake Wait Time for Stopping
b124 Brake Wait Time for Confirmation
b125 Brake Release Frequency Setting
b126 Brake Release Current Setting
b127 Braking frequency
b130 Overvoltage suppression enable
b131 Overvoltage suppression level
Acceleration and deceleration
b132
rate at overvoltage suppression
Overvoltage suppression
b133
propotional gain
Overvoltage suppression Integral
b134
time
Monitored data or setting
Clearance by setting "01" and pressing the STR key
1. to 1000.
0.10 to 9.99 (Hz)
0.5 to 15.0 (kHz) (subject to derating)
00 (clearing the trip history), 01 (initializing the data),
02 (clearing the trip history and initializing the data)
00 (Japan), 01 (EU), 02 (U.S.A.)
0.1 to 99.0
00 (enabling), 01 (disabling), 02 (disabling only the function to stop)
00 (starting with 0 Hz), 01 (starting with matching frequency), 02 (starting
with active matching frequency)
00: invalid, 01: valid
0.0 to 100.0 (%)
00 (deceleration until stop), 01 (free-run stop)
00 (always operating the fan), 01 (operating the fan only during inverter
operation [including 5 minutes after power-on and power-off])
00 (disabling), 01 (enabling [disabling while the motor is topped]), 02
(enabling [enabling also while the motor is topped])
330 to 380, 660 to 760(V)
00 (disabling the thermistor), 01 (enabling the thermistor with PTC), 02
(enabling the thermistor with NTC)
0. to 9999. (Ω)
0. to "free-setting V/f frequency (2)" (Hz)
0.0 to 800.0 (V)
0. to "free-setting V/f frequency (3)" (Hz)
0.0 to 800.0 (V)
0. to "free-setting V/f frequency (4)" (Hz)
0.0 to 800.0 (V)
0. to "free-setting V/f frequency (5)" (Hz)
0.0 to 800.0 (V)
0. to "free-setting V/f frequency (6)" (Hz)
0.0 to 800.0 (V)
0. to "free-setting V/f frequency (7)" (Hz)
0.0 to 800.0 (V)
0. to "free-setting V/f frequency (8)" (Hz)
0.0 to 800.0 (V)
00 (disabling), 01 (enabling)
0.00 to 5.00 (s)
0.00 to 5.00 (s)
0.00 to 5.00 (s)
0.00 to 5.00 (s)
0.00 to 99.99, 100.0 to 400.0 (Hz)
0.0 to 2.00 x "rated current"
0.00 to 99.99, 100.0 to 400.0 (Hz)
00 (disabling the restraint), 01 (controlled deceleration), 02 (enabling
acceleration)
330 to 390 (V) (200 V class model), 660 to 780 (V) (400 V class model)
0.10 to 30.00 (s)
0.00 to 2.55
0.000 to 9.999 / 10.00 to 65.53 (s)
8 - 8
Setting during
Default
operation
(allowed or
not)
_FF _FEF _FUF
00
1.
0.50
5.0
00
00 01 02
1.0
00
00
00
0.0
00
00
00
360/
720
00
3000.
0.
0.0
0.
0.0
0.
0.0
0.
0.0
0.
0.0
0.
0.0
0.
0.0
00
0.00
0.00
0.00
0.00
0.00
Rated current of inverter
0.00
00
380/
760
1.00
0.50
0.060
Change
during
operation
Page
(allowed or
not)
4-4
4-42
4-43
4-75
4-2
4-9
4-52
4-44
4-45
4-9
4-45
4-72
4-17
4-81
4-41