Hitachi SJ700-2 Instruction Manual page 56

Chapter 3 Operation
(2) Example of operation in full display mode ("b037" = "00")
All parameters can be displayed in full display mode. The display sequence of parameters matches
their sequence shown in Chapter 8, "List of Data Settings."
Key operation and
transition of codes on
display (in monitor or
function mode)
Pressing the or
1
increases or decreases the numerical data displayed in data display mode.
Press the or
1 2
increase/decrease numerical data fast, press and hold the key.
Monitor
mode
FUNC
Function
mode
FUNC
FUNC
FUNC
FUNC
FUNC
FUNC
FUNC
Key operation and
transition of monitored
data on display (in monitor
or function mode)
key respectively scrolls up or down the code displayed in code display mode or
2
key until the desired code or numerical data is shown. To scroll codes or
(Monitor
display)
(*1)
or
FUNC STR
(Data display)
(*1) (*2)
or
FUNC STR
For the display and key
operation in extended
function mode U, see the
or
FUNC STR
next page.
Key operation and
transition of codes on
display (in extended
function mode)
*1 The content of the display varies depending on the
parameter type.
*2 To update numerical data, be sure to press the
key after changing the data.
STR
or
FUNC STR
or
FUNC STR
or
FUNC STR
or
FUNC STR
or
FUNC STR
3 - 8
Key operation and
transition of monitored
data on display (in
extended function mode)
(*1) (*2)
(Data display)
Extended
function
mode A
FUNC
or
FUNC STR
Extended
function
mode B
Extended
function
mode C
Extended
function
mode H
Extended
function
mode P