Control Panel Assy - Brother MFC5490CN Service Manual

6.1.5

Control Panel ASSY

(1) Remove three screws from the control panel ASSY.
(2) Pull up the rear end of the control panel ASSY and turn it up slightly.
NOTE: Do not pull the control panel ASSY away from the machine since it is connected to
the machine with the panel-main harness.
(3) While holding the control panel ASSY at an angle of approx. 45°, disconnect the panel-
main harness from the main PCB.
Upper cover
Assembling Note: When mounting the control panel ASSY on the upper cover, first fit the
nine front hooks into the square holes provided in the front top of the upper cover.
Taptite, cup B
M3x10
Control panel ASSY
Panel-main harness
Main PCB
6-25
Hooks
Square holes
(6_13_BHL9_A4)
Confidential