Wsw60 - Brother MFC5490CN Service Manual

• Selectors 3 through 7: Checking of the specified character code set when displaying or printing
Setting these selectors to "0, 0, 0, 0, 0" does not check any character code set. When folder/
file names stored in memory cards or USB flash memory drives contain Chinese
characters, for example, those characters may get garbled in displaying on the color LCD
or printing indexes. If it happens, select the character code set of the language in use with
these selectors.
• Selector 8: Improvement of DTMF detection function (to minimize the effects of momentary
power failure or noise)
When DTMF cannot be detected due to a momentary power failure or noise, try to use this
selector.
Selector
No.
1 Not used.
Key repeat start time and interval
2
for the touch panel
3
(Not used.)
Adjustment of temporary
4
connection timing of Caller ID
5
(Not used.)
Output of CNG detection result to
6
the activity report
Delay time from detection of a line
7
polarity reversal until permission of
8
polarity reversal interrupt
Note: Selectors 2 and 3 are applicable to models with touch panel.
Note: Selectors 4 and 5 are applicable to Japanese models when caller ID service is available.
• Selectors 2 and 3: Key repeat start time and interval for the touch panel
These selectors specify the key repeat start time and interval for the touch panel.
The time (in seconds) specified by these selectors apply to both the key repeat start time
and interval. If these selectors are set to "0, 0," however, the key repeat start time is 0.5
second, but the interval is changed from 0.5 second that applies to the first 2.5 seconds to
0.2 second that applies after the first 2.5 seconds.
the folder/file names stored in memory cards or USB flash memory drives

WSW60

(Function setting 25)
Function
App. 4-63
Setting and Specifications
No. 2 3
0 0 : 0.5 sec.
0 1 : 1.0 sec.
1 0 : 1.5 sec.
1 1 : 2.0 sec.
No. 4 5
0 0 : No adjustment (default)
0 1 : Fast
1 0 : Standard
1 1 : Slow
0: Disable
(default)
No. 7 8
0 0 : 500 ms
0 1 : 750 ms
1 0 : 1000 ms
1 1 : 1500 ms
sec.: second(s), ms: millisecond(s)
1: Enable
(Not used.)
Confidential