Frequency Band Selection For Incoming Calling Signal; No. Of Rings In Auto Ans Mode - Brother MFC5490CN Service Manual

Selector
No.
Frequency band selection (lower
1
limit) for incoming calling signal
2
(CI)
Frequency band selection (upper
3
limit) for incoming calling signal
4
(CI)
5
|

No. of rings in AUTO ANS mode

8
• Selectors 1 through 4: Frequency band selection for incoming calling signal (CI)
These selectors are used to select the frequency band of CI for activating the AUTO ANS
facility.
In the French models, if the user sets the PBX to OFF from the control panel, the setting
made by selectors 1 and 2 will take no effect and the frequency's lower limit will be fixed
to 32 Hz. (Even if the setting made by these selectors does not apply, it will be printed on
the configuration list.)
• Selectors 5 through 8: No. of rings in AUTO ANS mode
These selectors set the number of rings to initiate the AUTO ANS facility.
WSW14
(AUTO ANS facility setting)
Function
App. 4-19
Setting and Specifications
No. 1 2
0 0 : 13 Hz
0 1 : 15 Hz
1 0 : 23 Hz
1 1 : 20 Hz
No. 3 4
0 0 : 30 Hz
0 1 : 55 Hz
1 0 : 70 Hz
1 1 : 200 Hz
No. 5 6 7 8
0 0 0 0 :
0 0 0 1 :
0 0 1 0 :
0 0 1 1 :
0 1 0 0 :
0 1 0 1 :
0 1 1 0 :
0 1 1 1 :
1 0 0 0 :
1 0 0 1 :
1 0 1 0 :
1 0 1 1 :
1 1 0 0 :
1 1 0 1 :
1 1 1 0 :
1 1 1 1 :
Fixed to once
1 to 6 times
1 to 8 times
2 to 8 times
1 to 2 times
1 to 3 times
1 to 4 times
1 to 5 times
2 to 3 times
2 to 4 times
2 to 5 times
2 to 6 times
1 to 10 times
2 to 10 times
3 to 5 times
4 to 10 times
Confidential