Brother MFC5490CN Service Manual page 224

(4) Pull the four lock arms on the rear of the paper tray outwards and release the four latches of
the bank ASSY. Then pull the bank ASSY up and out of the paper tray.
Assembling Note: When mounting the bank ASSY, first insert the four pawls into the
openings in the paper tray and then press the inside of the bank ASSY so that the latches
snap into place.
(5) If the base pad needs to be replaced, peel it off the bottom of the paper tray.
Note: Once removed, the base pad will become unusable and a new pad will have to be put
back in.
Assembling Note: When attaching a new base pad to the paper tray, align the edge of the
base pad with the front edge of the depressed section on the paper tray as shown below.
Bank ASSY
Base pad
Latch
Lock arm
Depressed
section
Pawls
Paper tray
6-74
Base pad
Paper tray
Align the edge of the
base pad with the front edge
of the depressed section on the
paper tray.
Paper tray
Bank ASSY
(Tray_mini9_4)
Confidential