Specify The Cis Type - Brother MFC5490CN Service Manual

-- Specify the CIS type --

E: A type
F: B type
L: C type
(1) Press the 5 and 9 keys in this order in the initial stage of the maintenance mode.
The "1:MO 2:CO 3: 3:CHG?" appears on the LCD.
(2) To call up the CIS type menu, press the 3 key.
(The "1:MO" is for checking the CIS travel, as described on the previous page. The "2:CO"
is for checking scanning clocks at the factory, so do not access it.)
The "CIS TYPE SET" appears on the LCD.
(3) If the CIS type is "E" (A type), press the 0 key; if "F" (B type), press the 2 key; if "L" (C
type), press the 1 key.
Upon completion of the entry, the machine returns to the initial stage of the maintenance
mode.
Bar code label
9-32
(CIS_Label_BHL9_A4)
Confidential