Resetting Purge Or Flushing Counter - Brother MFC5490CN Service Manual

Resetting purge or flushing counter

1) On the machine, press the Menu and Black Start (Mono Start) keys in this order. Next
press the key four times to make the machine enter the maintenance mode.
TIP: Models equipped with a numerical keypad on the control panel can enter the
maintenance mode in the same way as conventional models; that is, by pressing the Menu,
*, 2, 8, 6 and 4 keys in this sequence.
The machine beeps for approx. one second and displays "
LCD, indicating that it is placed in the initial stage of the maintenance mode, a mode in
which the machine is ready to accept entry from the keys.
2) Press the 8 and 0 keys in this order in the initial stage of the maintenance mode to call
up the machine's log information. (Function code 80. Refer to
3) Press the Black Start (Mono Start) key several times until the purge or flushing count
appears on the LCD.
4) Press the 2, 7, 8, and 3 keys in this order to reset the purge or flushing count.
5) Press the Stop/Exit key to return the machine to the initial stage of the maintenance
mode.
6) Press the 9 key twice to return to the standby state.
9-49
" on the
Section 9.4.26.)
Confidential