Using The Timer; Setting Or Cancelling A Timer From The Epg - Strong SRT 5020X User Manual

• To scroll through the channels, press CH▼ or CH▲.
• To scroll through the programs for a particular channel, select that channel and the press
VOL or VOL . (If you scroll past midnight, the programs for the next day are displayed.)
You can also display extended information about a program in Weekly mode. Scroll to that
program and press the yellow button on the remote control. (Press EXIT to close the extended
information.)
To switch back to Daily mode, press the red button on the remote control.

Using the timer

You can set up to eight times at which specified channels will automatically come on or turn off.
Follow this procedure to set or change a timer.
There are three ways to set or cancel a timer: from the EPG, from the Configuration menu, and by
pressing TIMER on the remote control.

Setting or cancelling a timer from the EPG

1. Press EPG on the remote control. The Electronic Program Guide appears.
2. Choose the program you want to come on at wakeup time. (This is optional at this stage. If you
don't do it here, you can do it later in this procedure.)
3. Press the blue button on the remote control.
The Wakeup Timer window appears. If you have already set a timer, the next available timer is
shown, with information about the program you selected in the previous step showing.
38