Table of Contents
Advertisement
Maintenance.fm Page 14 Lundi, 11. juin 2001 5:43 17
Code 1B - Transmission failed
During transmission: start again.
During reception: ask your subscriber to resend the document.
Codes 40 and 41 - No answer from provider
The modem cannot connect to the Internet service provider. If the error always occurs, check the
supplier's dial-up number.
Code 42 - Cannot acces provider
The service provider refuses the connection, the sercice is temporarily unavailable. if the error
always occurs, check the Internet connection parameters.
Code 43 - Transmiss. server unavailable
Cannot connect to the SMTP server for sending mail, the service is temporarily unavailable. If the
errors always occurs, check the Internet e-mail and server parameters.
Code 44 - Reception server unavailable
Cannot connect to the POP3 server for mail reception, the service is temporarily unavailable. If the
errors always occurs, check the Internet e-mail and server parameters.
Code 45 - Provider disconnected
The service is temporarily unavailable; try again later.
Code 46 - Trans. server disconnected
The SMTP server for sending mail is disconnected. The service is temporarily unavailable; try
again later.
Code 47 - Reception server disconnected
The POP3 server for mail reception is disconnected. The service is temporarily unavailable; try
again later.
Code 48 - Disconnection from Internet
The service is temporarily unavailable; try again later.
Code 49 - Cannot connect to Internet
Check the call number and eventually the associated prefix of the machine.
To check the Internet parameters, print them by pressing in turn the keys M
If the colour printer has one of the problems described below, the signal "On" flashes red, and you
can't use your fax temporarily. The corresponding message is displayed on the screen.
Date en cours : 11 juin 2001
\\Sct31nt3\doc 31nt3 mac\SAGEM FM\DOC EN COURS\MFC 23260972-6_38xx Sagem GB\Maintenance.fm
6-14
Maintenance
, 9, 4, 5 and O
.
ENU
K
Advertisement
Table of Contents
