Sending Fax Later; Direct Inward Dialling Or Selecting Sub-Address; Listening While A Connection Is Established; Broadcasting - Sagem Phonefax 40 User Manual

Hide thumbs Also See for Phonefax 40:
Table of Contents

Advertisement

Direct inward dialling or selecting
sub-address
Direct inward dialling or sub-address
You can send a fax to a direct-inward dialling number or a
sub addressor or call from a direct-inward dialling number
or sub address - for example to use a certain service of a fax
EN
database provider. For this purpose, attach the direct-in-
ward dialling number or sub address with a short dialling
pause to the fax number.
1 Enter the desired number using the numeric keypad or
select a saved entry.
2 Hold R pressed (for at least two seconds).
3 Enter the direct-inward dialling number or sub address.
4 Press o. The direct-inward dialling number or sub ad-
dress is dialled only after a short pause.
Listening while a connection is es-
tablished

Listening while a connection is established

You can listen while a connection is established, for exam-
ple if a fax transmission constantly fails.
Enter the desired number using the numeric keypad or se-
lect a saved entry. Press l.
No hands-free operation
Hands-free operation is not possible with this func-
tion. You cannot answer if the subscriber picks up.

Broadcasting

Broadcasting
You can send one fax to multiple recipients in succession.
Entering Recipients Individually
1 Insert the document.
2 Press OK, 34 and OK. The document is now read.
3 Enter the desired number using the numeric keypad or
select a saved entry.
4 Confirm with OK.
5 Enter the next telephone numbers.
6 Confirm with OK. You can enter up to 25 recipients.
7 Press o. The device transmits the fax message succes-
sively to all recipients.
Sending a Fax to a Group
1 Insert the document.
2 Press OK, 13 and OK.
3 Use [ to select the group to which you would like to
send a fax.
4 Confirm with OK.
5 Using [ select SEND FAX? .
6 Confirm with OK.
Transmission to Multiple Recipients
If your machine cannot reach a recipient, the fax
message is sent to the other recipients. After the ma-
chine has called all recipients, it once again dials the
numbers that previously could not be reached.
22

Delayed Fax Transmission

Delayed Fax Transmission
If you would like to make use of the lower telephone tariffs
or if the recipient can be reached at some specific time on-
ly, you can send the fax at a later time – within 24 hours.
1 Insert the document.
2 Press OK, 33 and OK.
3 Enter the time, at which the document should be trans-
mitted, e.g. 14 00 for 2 pm.
4 Confirm with OK.
5 Enter the desired number using the numeric keypad or
select a saved entry.
6 Selecting a saved entry: Confirm the selected en-
try using OK.
7 Press o. The device goes into standby mode and trans-
mits the fax at the entered time. You can continue to
make telephone calls and receive faxes.

Sending Fax Later

Press j to eject the document. This interrupts the
standby mode.

Receiving Faxes

Fax Reception
If you have not changed the factory settings, received faxes
will be printed out automatically. If no paper or no ink
film is inserted, the machine saves the incoming faxes. The
ä - button blinks. Once paper or a new ink film is
inserted, the saved faxes are printed out.
Paper Error
Check whether you have inserted and clamped in the
paper correctly. The lever on the right next to the pa-
per feed mechanism must be pushed back.
Full Message Memory
If the message memory is full, no additional messages can
be received. A warning appears on the display. Observe the
information in the technical data.
Delete Fax Memory Service Code
If there are problems with printing out saved fax
messages, a service code is available (see also section
Service, page 42).

Receiving fax manually

Select manual reception under number of rings of the fax
switch (see Chapter Setting the Fax Switch, page 31). The
device will not receive faxes on its own. This setting is use-
ful, when you want to receive faxes via a modem connected
to a computer.
Receiving fax manually
You can start fax reception manually, by pressing o.

Polling Faxes

Fax Polling
With the fax polling function, you can retrieve faxes that
lie ready in the dialled fax machine. You can also provide
documents on your machine to be polled by others.
Polling Faxes Directly
1 Enter the desired number using the numeric keypad or
select a saved entry.
2 Hold o pressed (for at least two seconds).
Sagem SPFX 40 · 45

Advertisement

Table of Contents
loading

This manual is also suitable for:

Phonefax 45Phonefax 40sPhonefax 45ds

Table of Contents