General - Sagem MF 3850 MF 3830 User Manual

Installation.fm Page 2 Lundi, 11. juin 2001 5:42 17
• Do not place the printer in direct sunlight, near radiators, air conditioning and in general in
areas that are too hot, dry, damp or dusty.
• Avoid areas with frequent vibrations.
• Avoid areas where water or other products could accidentally spill on the printer.
• Never try to access the hot parts (heater), or try to remove the cover (laser beam).
6HWWLQJ WKH FRQVXPDEOH LWHPV
6HWWLQJ WKH IRXU FRORXU WRQHU FDUWULGJHV
Your printer has 4 colour toner cartridges: Cyan, Magenta, Yellow and Black.
To install the starting cartridges :
+
Open the front cover of the printer.
+
Remove the cartridges from their packaging.
+
Repeat the following steps for each colour toner cartridge.
Caution -
corresponding colour label. Exert no pressure when you insert the cartridge in the housing. Check
that you insert the cartridge of the right colour.
+
Gently shake the cartridge sideways to
event out the toner.
+
Install the toner cartridge. Align the
cartridge and slid it entirely in the
printer.
Date en cours : 11 juin 2001
\\Sct31nt3\doc 31nt3 mac\SAGEM FM\DOC EN COURS\MFC 23260972-6_38xx Sagem GB\Installation.fm
A colour label identifies each cartridge. Place the cartridge in the housing with the
1-2
+
Remove the protection bar.
+
Each cartridge is inserted in the housing
which has the corresponding colour label
(E).
Installation