Sagem MF 3850 MF 3830 User Manual page 87

Maintenance.fm Page 13 Lundi, 11. juin 2001 5:43 17
Maintenance
Code 06 - Printer default
An incident occurred in the printer part: no paper, paper jam, opened cover. In the reception
mode, this incident appears only if the reception parameter no paper is switched to
(refer to paragraph Reception without paper, page 3/5).
P
APER
Code 07 - Disconnected
The link has been cut (bad line). Check the call number.
Code 08 - Quality
The doucment you sent was badly received. Contact your subscriber to know if it must be sent
again. The disturbance may have occurred in an unimportant part of the document.
Code 0A - No document to be polled
You tried to poll a document from a subscriber who had not prepared his document (no deposit)
or the password entered was incorrect.
Code 0B - Wrong number of pages
There is a difference between the number of pages indicated during preparation for the
transmission and the number of pages sent: check the number of pages in the document.
Code 0C - Received document error
Ask the subscriber who called you to check the length of his document (it is too long to be
completely received).
Code 0D - Transmission failed
Ask the sender to retransmit the document.
Code 13 - Memory full
Your fax can no longer receive since its memory is full: there are too many received unprinted
documents or too many documents in the transmission line.
Print the received documents and delete or transmit immediately the documents in the
transmission line.
Code 14 - Memory full
Received document memory full. Put the printer back in working order.
Code 15 - Unknown mailbox number
You wish to deposit a document in a subscriber's mailbox. The mailbox number does not exist.
Code 16 - No Relay Bcst list Nr x
You requested a document relay from a remote fax but the fax has not programmed the list of
subscribers requested.
Code 17 - Unknown mailbox number
You wish to recover a document from a subscriber's mailbox. The mailbox number does not
exist.
Code 18 - Relay Bcst impossible
You requested a document relay from a remote fax which does not have the relay broadcast
function.
Code 19 - Subscriber has stopped
The communication has been stopped by your subscriber. (Example: a fax wanted to poll your
fax but there is no document deposited).
Code 1A - Disconnected
The transmission has not started. The telephone line is too busy.
Date en cours : 11 juin 2001
\\Sct31nt3\doc 31nt3 mac\SAGEM FM\DOC EN COURS\MFC 23260972-6_38xx Sagem GB\Maintenance.fm
6-13
W
ITHOUT