Sending Fax Manually; Direct Inward Dialling Or Selecting Sub-Address; Eavesdropping While Connection Is Established; Sending To Multiple Recipients (= Broadcasting) - Sagem Phonefax 4840 User Manual

Short Dial: Press Ý. Select the desired entry using [
or with the numeric keys.
Recalling Short Dial Number
Notice
Access Function
You can also load short dial entries by holding
the respective number key pressed (for at least
two seconds).
Speed Dialling: Press the desired speed dial key
(ë).
Redial List
Redial List: Press @. Use [ to select an entry from the
list of the dialled numbers.
Outgoing Calls
Notice
Access Function
You can also load the redial list by pressing OK,
22 and OK.
Caller List: Press and hold @ (at least two seconds).
Use the [ to select an entry from the list of callers.
Calls Received
Notice
Access Function
You can also load the caller list by pressing OK,
21 and OK.
CLIP Prerequisite
Notice
Calling Line Identification (CLIP)
For this function to work, the Caller Line Iden-
tification (CLIP) must be activated for your tel-
ephone connection (country and network
dependent). The number and name will not be
shown if the caller suppresses his number.

Sending Fax Manually

1 Insert the document.
2 Enter the desired number using the numeric keypad or
select a saved entry.
3 Press l.
4 Press o.
Direct Inward Dialling or
Selecting Sub-address
Direct Inward Dialling or Sub-address
You can send a fax to a direct-inward dialling number or a
sub addressor or call from a direct-inward dialling number
or sub address - for example to use a certain service of a fax
database provider. For this purpose, attach the direct-
inward dialling number or sub address with a short dialling
pause to the fax number.
1 Enter the desired number using the numeric keypad or
select a saved entry.
2 Hold R pressed (for at least two seconds).
3 Enter the direct-inward dialling number or sub address.
Fax · Sending Fax Manually
4 Press o. The direct-inward dialling number or sub
address is dialled only after a short pause.
Eavesdropping while Con-
nection is Established
Type 1 (kleiner Core)
(SPFX¦43, SP¦4840)

Eavesdropping while Connection is Established

You can listen while a connection is established, for exam-
ple if a fax transmission constantly fails.
Enter the desired number using the numeric keypad or
select a saved entry. Press l.
No Hands-free Operation Possible
Notice
No Hands-free Operation Possible
Hands-free operation is not possible with this
function. You cannot answer if the subscriber
picks up.
Sending to Multiple Recipi-
ents (= Broadcasting)
Broadcast Transmissions
You can send one fax to multiple recipients in succession.
Entering Recipients Individually
1 Insert the document.
2 Press OK, 34 and OK. The document is now
read.
3 Enter the desired number using the numeric keypad or
select a saved entry.
4 Confirm with OK.
5 Enter the next telephone numbers.
6 Confirm with OK. You can enter up to 25 recipients.
7 Press o. The device transmits the fax message succes-
sively to all recipients.
Sending a Fax to a Group
1 Insert the document.
2 Press OK, 13 and OK.
3 Use [ to select the group to which you would like to
send a fax.
4 Confirm with OK.
5 Using [ select SEND FAX? .
6 Confirm with OK.
Transmission to Multiple Recipients
Notice
Transmission to Multiple Recipients
If your device cannot reach a recipient, the fax
message is sent to the other recipients. After the
device has called all recipients, it once again dials
the numbers that previously could not be
reached.
EN
21