Connecting Handset; Connecting The Telephone Cord; Prerequisites For Voice Over Ip; Establishing A Connection - Sagem IP PHONEFAX 49A User Manual

Connecting handset

Connecting the Handset
Plug one end of the spiral cable into the socket on the tel-
ephone handset. Insert the other end into the socket desig-
nated with the ) symbol.
Hörer anschließen

Prerequisites for Voice over IP

For using the IP transfer services of your device, you re-
quire the following components:
• Existing Local Area Network (LAN) with a router.
• Broadband internet-link with high data transmission rate
(e.g. DSL)
• Registration with a Voice over IP provider, who supports
Session Initiation Protocol (SIP).
• Computer as a LAN client with Internet browser for con-
tinuous configuration via the web interface
Minimum browser
We recommend the following Internet browser.
Windows PC: Internet Explorer (Version 6.0 or
above), Apple Macintosh: Safari (version 1.3 or
above), Linux: Conquerer (version 3.2.1 or above)
optional and original
WLAN is optional and functions only with an origi-
nal adapter, which you can purchase through our or-
der service. More information: www.sagem.com
Download/Upload
For placing calls with high voice quality, not only the
download data transmission rate of your internet ac-
cess but also the upload data transmission rate is im-
portant. An asynchronous DSL access (ADSL) has
different data transmission rates for download and
upload. The upload data transmission rate should be
at least 128 Kbit per second.

Establishing a connection

Connection
With your device, you can call or fax either via the analog
telephone fixed network or via the Internet connection.
For both transfer methods to function, connect the device
to your analog telephone connection socket as well as to
the router of your Local Area Network (LAN). Follow the
following connections diagram.
Description of the connection diagram
4
‚ Voice over IP-device as network component and ana-
log fixed network telephone
ƒ Analog, public telephone fixed network (PSTN)
„ Internet
... Router
† Other computers in the network
Anschlussschema
Permanent connection
For being reachable with your Voice over IP tele-
phone number, your network should be permanently
connected with the Internet.
Connecting telephone and net-
work cable
Description of the rear side
You will find the connection sockets for telephone and
network cables on the rear side of the device.
Rückseite Detail

Connecting the Telephone Cord

Connecting the Telephone Cable
Connect the telephone cord to the device by inserting it in
the socket designated with LINE (RJ-11-Connector). In-
sert the telephone plug into your telephone connection
socket.
Line terminal
The device is a line terminal. That is, you cannot connect
additional telephone or additional devices serially down-
stream of the device to the same telephone socket.
Last telephone socket
If you have several telephone sockets for the same
connection, the device must be connected to the last
telephone socket.
Extension
If you connect your device as extension to a tele-
phone system, you must set it for working as an ex-
tension (also see Chapter "Telephone connections
and additional devices, page 43).