Procedure - Sagem MF 3850 MF 3830 User Manual

Installation.fm Page 9 Lundi, 11. juin 2001 5:42 17
Installation
+
Plug end of the telephone line (4) into its jack on the fax machine (E), and the other end
into the wall telephone socket.
+
Plug end of the LAN cord (as provided by your network administrator) into port (H) of
your fax machine and the other end into your local network port dedicated to your fax
machine.
Caution -
Refer to safety procedures in the Safety Chapter.
+
Plug end of the main power cord (1) into the jack of the fax (B), and the other end in the
wall outlet
+
Set the switch (G) (depending on model) to position 1 (On).
After a few seconds, when the printer has warmed up, the date and time will appear.
A chip card is delivered with the consumables. This card initializes the system which enables you
to know at any time the toner cartridges consumption level.
After installing all the consumables in the printer, you need to inform the machine about their
features.
For this purpose, you must read the chip card provided with the machine, before using it.
The screen indicates:
INIT
INSERT GAUGE CARD
+
Insert the chip card (or gauge card) in the card reader as showen below:
Date en cours : 11 juin 2001
\\Sct31nt3\doc 31nt3 mac\SAGEM FM\DOC EN COURS\MFC 23260972-6_38xx Sagem GB\Installation.fm
1-9