Sagem MF 3850 MF 3830 User Manual page 13

Installation.fm Page 3 Lundi, 11. juin 2001 5:42 17
Installation
6HWWLQJ WKH 23& FDUWULGJH
Caution -
Do not place the OPC cartridge in direct lighting and sunlight. Store it in its
protective packaging until you are ready to install it. Handle it carefully. Fingerprints, oil stains
and scratches damage the print quality.
Caution -
Make sure the front cover is completely open, so that you can move slightly the
cartridges forward, and leave a space to install the OPC cartridge. If the front cover is not
completely open, you may damage the OPC cartridge.
+
Open the upper cover of the printer.
+
Proceed in order to the following steps:
+
Pivot both lever locks upward (one on
each side) before setting up the OPC
cartridge.
+
Hold the OPC cartridge above the
printer, and place its pegs in the
corresponding slots of the lever locks.
Place the OPC cartridge with its white
tooth wheel on the right-hand side, and
with its green side facing you.
+
Insert the OPC cartridge.
Date en cours : 11 juin 2001
\\Sct31nt3\doc 31nt3 mac\SAGEM FM\DOC EN COURS\MFC 23260972-6_38xx Sagem GB\Installation.fm
+
Remove the protective sheet (R) from
the OPC cartridge and pull out both bolts
(S).
+
Lower both lever locks to fit the OPC
cartridge in the printer.
1-3