Lanier Copier System Edition Operating Instructions Manual page 1137

Note
To use this function, select "ON" for the "For-
warding" function in "Reception Mode".
p.198 "Reception Mode"
You can specify the End Receiver separately,
according to the Special Sender. If you do not
specify the Special Sender, the messages are
forwarded to the specified receiver.
"Special Senders to Treat Differently"
One receiver can be specified with this func-
tion. For multiple receivers, use Group Dial.
Chapter 3, "Groups" in the Basic Features
manual
You can print a Forwarding Mark on messag-
es that are forwarded.
User Parameters" (Switch02, Bit0)
You can specify whether or not to print for-
warded messages.
User Parameters" (Switch11, Bit6)
Operating InstructionsFacsimile Reference (option) <Advanced Features>
p.223
p.216 "Changing the
p.216 "Changing the
Programming Forwarding Stations
A A A A
Press the { { { { User Tools/Counter} } } } key.
B B B B
Press [Facsimile Features].
The Facsimile Features menu is shown.
C C C C
Select [Key Operator Tools].
The Key Operator Tools menu is shown.
209