Henny Penny 680 KFC Service Manual page 30

CONNECW
6. Press cycle selection switch after temperature is displayed
on front of control panel.
To shutdown burner:
1. Rotate manual valve knob of Combination Control to the
"OFF" position.
2. Turn Power/Pump Switch to the "OFF" position.
This fryer is equipped with a grounded cord and plug for your
protection against shock, and should be plugged into a 3 prong
grounded receptacle. Do not cut or remove grounding prong.
Before servicing the fryer, the burner should be shut
down and the electrical supply removed from the unit.
The fryer should be unplugged or the wall circuit
breaker turned off, or electrical shock could result.
1. Place breaded chicken on greased racks with the largest
pieces towards the outside of the rack.
2. Load racks into basket starting at the bottom of basket
and working up with each rack.
3. Place a clean, empty rack into the slot above the top rack
of chicken to prevent pieces from floating while cooking.
For additional information on racking chicken, refer
to KFC's COM.