Table of Contents
Advertisement
Power/Pump Switch
Cookpot
This reservoir holds the cooking shortening.
Cooking Rack
Lid Gasket
Operating Valve
Safety Relief Valve
Safety Relief Valve Lever
The Power/Pump Switch is a three way switch with center
"OFF"
position. Move the switch to the position marked
"POWER"
to operate the fryer. Move the switch to the
position marked "PUMP"
to operate the optional portable
filter pump. Certain conditions must be met prior to operaton
of the filter pump. These conditions are covered later in this
section.
This stainless steel rack consists of five shelves which contain
the food product during and after frying.
The lid gasket provides the pressure seal for the cookpot
chamber.
The dead weight style operating pressure relief valve is used
to maintain a constant level of steam pressure within the
cookpot. Any excess steam pressure is vented through the
exhaust stack.
The safety relief valve is an ASME approved spring loaded
valve set at 14.5 psi. In the event the operation valve becomes
obstructed, this safety valve will release excess pressure,
keeping the cookpot chamber at 14.5 psi. If this occurs, turn
the Power/Pump switch to the "OFF" position to release all
pressure from the cookpot.
THE LEVER IS NOT TO BE PULLED.
Severe burns from the steam will result.
Hide quick links:
Advertisement
Table of Contents
