Table of Contents
Advertisement
Although the display will read "COOL" in the stand-
by mode, the shortening is hot and could cause burns.
In the event of a power failure, no attempt should be
made to operate the fryer. The Model 680 Fryer is
equipped with an automatic ignition system and can
not be operated without electrical power.
When the operator wishes to filter, move the Power Switch
to the "OFF"
position and filter as usual (refer to filter
instructions). The display should read "COOL" before filtering.
Dropping
the shortening
while at the "DROP"
temperature and not in the "COOL" mode can result
in shortening overflowing the cookpot which could
cause serious burns, personal injury, fire and/or
property damage.
To avoid personal injuries or property damage be sure
shortening has been pumped back into the cookpot
before depressing the "EXIT COOL" switch. Unit will
enter heat mode.
The filter pump motor on the PF-180 is equipped with
a manual reset button in the event the motor's thermal
protection actuates. This reset button is located on the
rear of the motor. A hinged door is placed on the motor
cover to easily access this reset button.
ait approx-
imately 5 minutes before attempting
to reset this
protective device. Also, some effort must be used when
resetting the button and a definite "click" will be heard
when it resets.
3-7
Hide quick links:
Advertisement
Table of Contents
