Mode of use: Switchboard/operator
In Stand by mode with the first incoming call - same as with mode of use
office/regular for special handling of the call different options (answering machine,
reject, and forward) are available. In case function call target indication (page 78)
is active, this selection is offered under Options. Will there be more calls during the
ongoing call (call waiting) after a short notification these callers will be listed in the
display.
Function key F1
Function key F2
Function key F3
Taking the first call
Pick up handset
The call is being taken and you can talk to the caller.
Press loudspeaker key
The call is being taken and the telephone goes into handsfree mode.
Telephoning with the tiptel 85 System
Three function keys will be pre-programmed
during initial set up when selecting mode of
use Switchboard/operator - provided that the
telephone system does not use these function
keys for other purposes.
Accept
Transfer
Disconnect
Accept
Transfer
Disconnect
To take calls from callers being
signalled by the call waiting signal.
To connect an active call with a
call on hold (ECT).
To disconnect the active call
27