Dialling With Automatic Outside Line Access; Keypad - TIPTEL 85 System S0 User Manual

Dialling with automatic outside line access

If in the telephone system for the system telephone function "Automatic outside
line access" has been activated, on each line access you will immediately get an
outside line. Telephone numbers dialled in this case will always be sent to the
public switchboard and result in the requested connection set up.
If a s an exception you wish to call an internal subscriber there are two options:
In front of the extension number you put two "#" (e.g. "##22").
o
You press the Internal key and then dial the extension. The Internal key may also
be programmed to a function key (see also „Configuration options are as in
Suppress number.
", S.82)
o

If with most of your calls you wish to transfer them within your telephone
system it is strongly recommended for ease of use not to use automatic
outside line access.

Keypad

You must choose between the following settings variations:
Keypad dialling as standard dialling mode
The tiptel 85 System dialling mode can be permanently switched from normal dial
information (standard) to keypad.
To make the switch, in Main menu  Settings  Phone, configure the Permanent
keypad dial in the Dialling method option.

Only use these settings, if your system administrator asks you to. The
permanent keypad dialling is designed for specific applications. In normal use
with a Tiptel telephone system, not all functions will be available to you under
these circumstances.
Single event dialling with keypad
You can press the keypad dialling SELECTION KEY at any time in preset mode
whilst you are entering the number.
Telephoning with the tiptel 85 System
38