Charge Rate; Firmware Update - TIPTEL 85 System S0 User Manual

Charge rate

Main menu  Settings  Phone  Charge rate
In order to assign call costs correctly, a charge rate per unit has to be allocated
(independently of your network provider). The relevant rates per user or those for
the entire connection can be seen under Information.
Activate the entry by pressing the SELECTION KEY and entering the charge rate
using the format 00.00.

Firmware update

Main menu  Settings  Phone  Firmware update
The firmware of your system telephone is subject to permanent improvement and
maintenance. New firmware versions will be published at irregular intervals. You can
update these new versions via your telephone's update server.
Firmware v.1.13
Start firmware update .......
Server number:
002102428438
Phone
The title indicates the current version number of your device's firmware.
You can enter or change the server's phone number by pressing the SELECTION
KEY next to the server number.
To start the update process, press the SELECTION KEY next to Start firmware
update. You will be asked the security question, after which the TIPTEL update
server is automatically confirmed and the version updated. A progress bar informs
you of the current progress of the installation.

Only change the server numbers, if asked to do so by your system
administrator. If you enter the wrong number your update will not work
(in Germany the preset number is 02102 428 438 or your telephone system's
dial-out identifier).
The update server number is only defined for firmware updates for the device.
When the firmware update is complete, you will receive the corresponding message
in the display.
Settings
H
72