Table of Contents
Advertisement
IP Video Phone
7
Using tiptel VP 28
Overview
Call Type
tiptel VP 28 supports audio and video calls.
Audio calls: during the conversation, you can only hear the sound of the other party.
Video calls: during the conversation, you can not only hear the sound of the other party, but you
can also see each other. User can press
Answer Mode
tiptel VP 28 supports the following answer modes: handset, hands-free, and headset.
If the headset is connected to the phone , pick up the handset the phone will enable the headset
mode. If the headset is not connected to the phone, pick up the handset the phone will enable the
handset.
These answer modes are switched as follows:
The <SPK> key is used to switch the handset mode and hands-free mode.
The <SPK> key is used to switch the headset mode and hands-free mode.
Multiple Accounts
tiptel VP 28 supports four independent SIP accounts. If multiple accounts are enabled,
corresponding account names are displayed on the standby screen.
You can click the account to select an account. After an account is selected, the dial page of the
corresponding account will be displayed.
You can assign the line function to a DSS key. If the line key is assigned, you can directly click the
line key to enter the dial screen.
Making a Call
Dialing
To use the headset, handset, or hands-free mode to make a call, proceed as follows:
Pick up the handset, press the <SPK> key, or connect the headset.
Step 1
Step 2
The phone enters the dial screen and plays the dial tone.
Enter the called number, click
Step 3
You can click <Video Call> or <Voice Call> to switch the call type.
If you have more than one account, click <Account> to choose a account.
to enable or disable the local video.
to send.
- 69 -
Using tiptel VP 28
Advertisement
Table of Contents
